Carburetors

Rich's Taylor'd Porting offers a complete line of Mikuni and Keihin Carburetors for all applications, whether they are vintage or modern Dirt, Street, ATV, Snowmobile, Watercraft and Shifter-Karts.

Although Rich's Taylor'd Porting does not fancy itself as a master warehouse full of carburetors waiting for your beckoned call, Rich knows that his porting and intake mods often need just the right carb and/or rebuild/jet kit to make everything come together. In that light, he offers himself as a source for Mikuni & Keihin products from Sudco.

Typical components of a Jet Kit

_________________________________________________

Rich's Taylored Porting Exclusive!

the BAFB Chamber!

This hand built, Oversized Float bowl Chamber is designed to completely eliminate fuel starvation in the extremes of competition.

As you can see, it doubles the size of the typical float bowl, while still fitting inside the space of the stock float bowl.

Designed and built for each carburetor and engine application, this is a simple "bolt-on" addition to your carb, allowing for immediate gains in performance.

________________________________________________

Venturi Divider Systems for Carbureted Engines

The Venturi Divider System is truly one of the most effective modifications that you can make to your (vintage or modern) 2 & 4-stroke motorcycle engine's carburetor.

Rich's Venturi Dividers System provides noticeable horsepower improvements, and quicker throttle response at 1/2 and/or 1/4 throttle for 2-strokes, 4-strokes engines. 

________________________________________________

PLEASE NOTE: Rich's Taylor'd Porting DOES NOT recommend K&N Air Filters. Although testing shows that they flow more air over stock and even some other aftermarket filters, they also flow way too much debri into the engine shortening it's lifespan measurably. A good oiled foam filter is your best choice for protection that valuable asset; your engine!

If you have any questions regarding my work (what I do) and my experience, please call me as I would be more than happy to talk with you regarding how I can meet your needs.You can view what others say about my work at the TESTOMINALS page.

For all your porting and high-performance engine modification needs, contact Rich @ 1-877-7Hodaka or 435-438-5237 (office),

702-858-9177 (cell) or <racerclam@msn.com>

________________________________________________

Hand crafted for your exact needs and application

Tapered bore, Venturi Divider System, "Dial-A-Jet" kit installed

Top view of the same extensively modified carb

________________________________________________